Make sure this is in the correct slot or the aperature will get stuck at one setting. The aperature ring has a metal part that slides through a piece for proper operation that can’t be missed upon assembly or it will not worn. When reassembling there is one part I missed he first time. This is what it should look like when working properly and ready to take a photo.

Rangefinder camera - A Foca camera of 1947 at the Muse des. The Electro 35 is a rangefinder camera made by Japanese company Yashica from the mid-1960s with a coupled and fixed 1:1.7 45 mm. This is the shutter mech when not charged and ready below. Yashica electro 35 gx Yashic Electro 35 GX rangefinder instruction manual, user manual. I had to lift up on one of the stuck gears in this mech to allow the timing lever to reset back to its start position. This is the timer that was holding everything up.

the wires do not in plug and I just gently rotate my aperature ring out of the way.

Yashica Owners Manual Electro 35 GSN GTN Original Vintage 35mm Film. Next, after removal of the center nothed ring this is what you have. Yashica Camera Repair Service CLA and Battery Adapter for YOUR Electro 35 G Gs GSN. This is removed by unscrewing the center ring around the shutter. You ONLY need to remove the inner three screws, this removes the entire outer ring on the lense, this is the part that has the B/AUTO/Flash settings on it.Īfter removing the three inner screws you are left with this. The product you get is an exposed shutter and multiple mounting screws. Thanks You can also downoad the whole volume as a 33 MB pdf.Only one download per. The first removal I needed to use a screw driver and a small hammer to tap it free as shows below. 1974 manual, found on a flea market and made available to the world by Alfred Bina. Next I do the same thing to unscrew the outer lens, this will expose mounting screws. There are two small slots that allow for a small flathead screw driver to spin the piece. Some as I read about are quite difficult but mine was very easy to unscrew. You start by removing the lens ring as shown below. Here it is, this is a step by step process in which I had to take to fix a stuck timer and get my shutter mechanism to work again.

Repair manual yashica electro 35 gx